These stationary cap style Internal Halyard Pole trucks with a single pulley are made of cast aluminum construction for use on rope style internal halyard flagpoles. A small pulley assembly is added to the inside of a standard outrigger style truck to allow the halyard to feed from inside the flagpole. The pulley assembly has a 1-1/2 in. outside diameter cast nylon pulley on a 1/4 in. stainless steel axle and is held in place inside the truck by a 516 in. stainless steel set screw. The truck has a 2 in. or 1-1/2 in. outside diameter cast nylon pulley on a 1/4 in. stainless steel axle and is designed to slip over the top of the flagpole, and be secured with three 5/16 in. stainless steel set screws. The top of the truck will accept an ornament with a standard 1/2 in. threading, but can be supplied with other sizes of threading. The ornament is held in place by a size 10-32 stainless steel pan head screw. maximum rope diameter is 5/16 in. All bronze colored accessories are supplied in a dark bronze #313 shade. If medium bronze #312, light bronze #311 or a custom color is desired, please call for pricing.
